Cameras - Honeywell HMAX082 Owner's Operation Manual

7.0 DESCRIPTION, CONTINUED

1 Cameras

1 Titles
1 Camera
2 Preset
3 Sector
2 Settings (Select Camera 1-16)
IR Lamps (Present/Absent)
Auto 180 (Enabled/Disabled)
Digital Zoom (Enabled/Disabled)
Home Setting (preset 0/tour
1/disabled)
Home Timer (000 to 100) min.
3 Tours (Select Camera 1-16)
4 Synchronisation
5 Privacy Zones
Presets 100–127 (privacy/standard)
6 Sector Zones (1-16)
7 Remote Reset
1 Power-up Reset
2 Camera Reset
3 Factory Reset (WARNING!)
To select options within the menus, press the corresponding number button (if
applicable), move the joystick stick up or down to move up one line or down one line
respectively, or move the joystick left or right to move between columns.
Press the lock button to exit a menu (Exits the current menu and returns the user to the
previous menu. If the user is at the main menu, pressing the lock button exits the menus
and returns the operator to normal operation.)
7.1 CAMERAS
To access the cameras menu:
1. Access the main menu by pressing the 9
button, the 0 button, the 9 button, the 0
button, and then pressing the lock button.
2. Access the camera menu, by pressing the 1 button.
Rev. 1
Table 3. Menu Setup Tree
Main Menu ( 9 0 9 0 lock)
2 Monitors 3 System
1 Auto-sequence 1 Time/Date Setting
2 Partitioning (not 2 Time/Date Format
available at this time) Clock (12-/24-hour)
Date (Day/Month/Year)
Month (2 numbers)
3 Text Brightness 3 Monitor Control
RS485/RS232
4 Universal Sequences (not
available at this time)
5 Language (not available at
this time)
6 Event Timers (not available
at this time)
7 Salvo Switching (not
available at this time)
18
4 Alarms
1 System Alarms
1 Settings
2 Actions
3 Contact Tables
(not available at this time)
4 Messages
(not available at this time)
2 Camera Alarms
(not available at this time)
(Month/Day/Year)
(Year/Month/Day)
(3 letters)
3 Alarm Properties
MAIN MENU
1 CAMERAS
2 MONITORS
3 SYSTEM
4 ALARMS
5 SOFTWARE
5 Software
900.0560
18-July-2005