Camera Select; Selecting By Camera Number; Camera Button - Honeywell HMAX082 Owner's Operation Manual

Matrix switcher, keyboards
Table of Contents

Advertisement

2.1.3 RS485 and RS232 Keyboard Control, Continued
The operation is also dependent on the type of RS485 keyboard; whether it is a Single
Monitor type (can control only one monitor output) or a Multi Monitor type (can control
either monitor outputs).
a. Single Monitor Type RS485 Keyboard
If a Single Monitor type RS485 keyboard and an RS232 keyboard are both
connected to the MaxCom Gold, and the RS232 keyboard is controlling the same
monitor output as the RS485, the RS485 keyboard cannot gain control of the
monitor output until the RS232 keyboard is disconnected from the MaxCom Gold.
The "RS232 KEYBOARD CONNECTED" message remains on the monitor display
until the RS232 keyboard is disconnected.
b. Multi Monitor Type RS485 Keyboard
If a Multi Monitor type RS485 keyboard and an RS232 keyboard are both connected
to the MaxCom Gold, the RS485 keyboard can control the monitor output not being
controlled by the RS232 keyboard. If the Multi Monitor type keyboard operator tries
to control the monitor the RS232 keyboard is controlling, the message, "RS232
KEYBOARD CONNECTED", is displayed on the monitor being controlled by the
RS232 keyboard, and a long error beep is produced at the keyboard. The message
remains on the monitor until the RS232 keyboard selects the other monitor output
for control or the RS232 keyboard is disconnected from the system.

2.2 CAMERA SELECT

2.2.1 Selecting by camera number

1. Press the number button(s) that correspond(s) to the camera number. For
example, to select camera 15, press the 1 button, then press the 5 button.
2. Press the camera button.

2.2.2 Camera Button

To sequence numerically between the cameras in the system, repeatedly press the
camera button until the desired camera is displayed.
If a camera is absent from the system, the MaxCom Gold automatically skips (auto-skip)
to the next camera that is present in the system.
Note: See section 2.3.1 for operation while auto-sequence is on.
Rev. 1
6
900.0560
18-July-2005

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hmax162Hkjmmtp

Table of Contents