Dvr Ldap Setup Continued; Creating Ldap Groups - Honeywell FUSION III DVR User Manual

Setup Options

DVR LDAP Setup Continued

Creating LDAP Groups

________________________________________________________________________________________________________
84
7. Click the Administration tab and then click User Management.
Log on again as the above privileged user and select the LDAP option.
8.
Note Not selecting the LDAP option at this stage will load the local user interface.
Click in the Select Group box.
1.
2. Click Add to create a new group.
Type the name of the new group in
3.
the Group Name box.
4. Select the Permissions for the
group.
5. Select which cameras you wish to
hide.
Note You are selecting the cameras
to HIDE, not to show.
6. Click OK to add the group to Active
Directory.
Tip You will also see within AD addition OU's created under the Group_Pri OU
that show each permission given.
Also within the Groups OU you will see the new group that you just created.