Connecting With Camera Finder; Assigning A Network Device To A Channel - Honeywell FUSION III DVR User Manual

Connecting with Camera Finder

Assigning a Network Device to a Channel

________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
From the Live View screen, click Setup.
1.
2. Click the Network Video tab.
Click the Add/Remove Device tab.
3.
Click Find Cameras to automatically find all connected Honeywell cameras.
4.
5. Select the check box next to the desired camera.
Click Get Device.
6.
7. Type the User ID and Password of the device.
8. Click Update.
1. From the Live View screen, click Setup.
Click the Network Video tab.
2.
3. Click the Channel Setup tab.
Click an available channel on the Channel List.
4.
5. Type the desired Position Name.
6. Select the appropriate network device added previously.
If the device has PTZ capabilities, select the PTZ Camera check box to enable.
7.
8. If supported, select the Use Network Camera Motion Detection check box.
Fusion III DVR User Guide
45