Monitor Setup; Power Setup - Honeywell FUSION III DVR User Manual

Monitor Setup

Power Setup

________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
Attach the Monitor to the rear of the DVR using the VGA cable supplied by the monitor
manufacturer. Refer to the monitor manual for detailed information on how to setup
and use it.
The monitor must be capable of having a screen resolution of
Note
1024 x 768 and display colors of at least 32 Bit.
Attach the AC power cable to the rear of the DVR.
WARNING! To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug
receptacle contact a licensed electrician to have it replaced with a
grounded electrical outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
Disconnect the power from the computer by unplugging the power cord
either from the electrical outlet or the computer.
Fusion III DVR User Guide
29