Pan / Tilt / Zoom
PTZ Address Setting
Accessing PTZ Menus
Opening and Editing the Honeywell MAXPRO Menu
________________________________________________________________________________________________________
112
Some protocols support software address settings.
The RX Addresses and ID settings are compatible with a particular line of receivers
that support 2 ID addresses
The PT Driver Address is associated with the PTZ ID address set on the camera. The
addresses must match for the DVR to communicate with the proper PTZ camera. This
is especially important when a large number of PTZ cameras are connected to the
DVR.
Note
To select a PT Driver Address of 129-254, manually enter the ID in the box.
Some protocols support the ability to access the Internal PTZ Onscreen Menu.
Camera Menu
Opens the PTZ Camera Menu.
Select
Select an item on the onscreen menu.
Close
Close the PTZ Onscreen Menu.
Up/down
The Up and Down buttons on the PTZ
controller move through the PTZ menu
options.
Left/Right
The Left and Right buttons on the PTZ
controller move through the PTZ menu
options and/or highlight options.
Since every PTZ camera is different, the functions of these options can vary slightly.
For available options, please refer to the camera's operations manual.
1.
Click the Camera Menu button. The Camera Menu will appear on the screen.
2.
Use the Up and Down buttons on the PTZ controller to scroll through the menu
options.
Click the Select button to select a menu option. Clicking Select will either scroll
3.
one menu deeper or it will change a selected option.
4.
Click Close to scroll one menu back, or if at the root menu level, it will close the
PTZ Menu.