Looping Outputs - Honeywell FUSION III DVR User Manual

Looping Outputs

8 Channel DVR
CH 1 in CH 2 in CH 3 in
CH 1 Out CH 2 Out CH 3 Out
16 Channel DVR
CH 1 in CH 2 in CH 3 in
CH 1 Out CH 2 Out CH 3 Out
32 Channel DVR
________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
The back of the DVR contains up to 32 video outputs, which may be connected to
video monitors or VCR's, depending on the DVR model. The connectors are standard
BNC connectors and may require termination depending on the destination of the
output. Make sure there is a video source connected to the corresponding input and
then connect a cable to the Channel Out.
CH 4 in CH 5 in CH 6 in CH 7 in
CH 4 Out CH 5 Out CH 6 Out CH 7 Out
CH 4 in CH 5 in CH 6 in CH 7 in
CH 4 Out CH 5 Out CH 6 Out CH 7 Out
32 Channel DVRs may have up to 32 looping outputs. Connect the included 16
channel video cables to the BNC Expansion Ports
CH 8 in CH 9 in CH 10 in CH 11 in
CH 8 Out CH 9 Out CH 10 Out CH 11 Out
CH 8 in CH 9 in CH 10 in CH 11 in
CH 8 Out CH 9 Out CH 10 Out CH 11 Out
CONT ROL
SENSOR
Fusion III DVR User Guide
CH 12 in CH 13 in CH 14 in CH 15 in
CH 12 Out CH 13 Out CH 14 Out CH 15 Out
CH 12 in CH 13 in CH 14 in CH 15 in
CH 12 Out CH 13 Out CH 14 Out CH 15 Out
ON
OFF
BNC A
ON
OFF
BNC B
COM
1 2 3 4 5 6 7 8
CH 16 in
C H 16 Out
CH 16 in
C H 16 Out
31