Status Check / Email; General; Users - Honeywell FUSION III DVR User Manual

Status Check / Email

General

Users

________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
1. Click the Setup button on the Main
Display.
Select the Administration tab.
2.
Click Status Check/Email.
3.
4. Select the Enable Email Alarm
check box.
Enter a From Name and e-mail
5.
Address.
Note This name and address will
appear in the From line of the
email alert message.
6. Enter the SMTP information for the
"from" email account. Contact the
email administrator for this
information if necessary.
7. If using a secondary email account
select the Use Secondary SMTP
Box and complete the SMTP
information.
8. Click the Test button to check
settings.
Click Apply when finished.
9.
Set up the General tab.
1.
2. Click the Users tab.
3. Select the type of event to send
email on.
Enter the User Name and Email
4.
Address of an email recipient.
5. Click the Add button
6. Repeat for additional recipients
and types of events
A separate email
Note
notification for each type of
event must be set up for a
single recipient to receive
notifications for each type
of event.
Click Apply when finished.
7.
Fusion III DVR User Guide
77