Table of Contents
Advertisement
Connecting with Camera Finder
Assigning a Network Device to a Channel
________________________________________________________________________________________________________
46
1.
From the Live View screen, click Setup.
2.
Click the Network Video tab.
3.
Click the Add/Remove Device tab.
4.
Click Find Cameras to automatically find all connected Honeywell cameras.
5.
Select the check box next to the desired camera.
6.
Click Get Device.
7.
Type the User ID and Password of the device.
Click Update.
8.
From the Live View screen, click Setup.
1.
Click the Network Video tab.
2.
3.
Click the Channel Setup tab.
Click an available channel on the Channel List.
4.
5.
Type the desired Position Name.
Select the appropriate network device added previously.
6.
If the device has PTZ capabilities, select the PTZ Camera check box to enable.
7.
8.
If supported, select the Use Network Camera Motion Detection check box.
9.
Select Intensive Motion, Intensive Sensor, and/or Intensive Instant to increase
the recording rate on an event.
Advertisement
Table of Contents
