Checking The Measurement Results; Reloading The Previous Ypao Adjustments - Yamaha Aventage RX-A1050 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 PHONO PHONO
TUNER TUNER BLUETOOTH BLUETOOTH USB USB NET NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV NET NET RADIO RADIO
MUTE MUTE VOLUME VOLUME
PROGRAM PROGRAM
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN
RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
9 9 0 0 MEMORY MEMORY ENT ENT

Checking the measurement results

You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to
select "Result" and press ENTER.
• You can also select "Result" from "Auto Setup" (p.110) in the "Setup" menu,
which displays the previous measurement results.
The following screen appears.
1
1
Measurement result items
2
Measurement result details
3
The number of measured positions (when multi
measure is performed)
2
Use the cursor keys to select an item.
Polarity of each speaker
Wiring
Reverse: The speaker cable may be connected with the
reverse polarity (+/-).
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency signals
Size
effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
Distance Distance from the listening position to each speaker
Level Output level adjustment for each speaker
3
To finish checking the results and return to the
previous screen, press RETURN.

Reloading the previous YPAO adjustments

When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
1
In the "Setup" menu, select "Speaker", "Auto
Setup", and then "Result" (p.109).
2
Use the cursor keys to select "Setup Reload" and
press ENTER.
2
3
3
To exit from the menu, press ON SCREEN.
44
En