Yamaha YBA-11 - Bluetooth Wireless Audio Receiver Manual

Introduction

Read the "Safety Brochure" before using the unit.
We greatly appreciate your purchase of this Yamaha product. To assure the finest performance, please read this manual carefully. Keep the manual in a safe place for future reference. The YBA-11 is a wireless audio receiver for connecting wirelessly with Bluetooth^® devices (mobile phone, portable music player, etc.). Through a digital connection with the AV product, it allows you to enjoy audio with a high sound quality.

Package contents

Check that the following items are included in the package.

1. YBA-11
   1. Bluetooth button
   2. Status indicator
2. USB Power Cable
3. Coaxial Digital Audio Cable
   • Owner's Manual (this manual)
   • Safety Brochure

Connecting to an AV product

1. Before connecting any cables, turn off the AV product.
2. Connect the YBA-11 and the AV product with the supplied USB Power Cable and Coaxial Digital Audio Cable as shown in the illustration.
   
3. After connecting the cables, turn on the AV product.

If the Yamaha AV product is not equipped with a DC OUT jack, connect the USB Power Cable to the USB jack.
For details on the location of jacks and the operation of the AV product, refer to its owner's manual.

Making a Bluetooth connection

With the Bluetooth device to be connected, perform the following operation.

1. Turn on the Bluetooth function to search for devices that can be connected.
2. When the list of Bluetooth devices appears, select "YBA-11 Yamaha".
   If a passkey (PIN) must be entered, enter "0000" with the number keys.
   

• For details, refer to the owner's manual of the Bluetooth device.
• If a connection cannot be made, see "Troubleshooting".

Playing audio from the Bluetooth device

Switch the input on the AV product to the jack where the YBA-11 is connected, and then operate the Bluetooth device to play music.

To disconnect the Bluetooth connection, perform the disconnection operation from the Bluetooth device, or press the Bluetooth button on the YBA-11.

YBA-11 status indicator

The status indicator appears as described below according to the operating status of the YBA-11.

* After flashing, the indicator turns off, and the YBA-11 stands by for a connection.

Troubleshooting

Check the following if the YBA-11 should not be operating properly.

Resetting the YBA-11

Press and hold down the Bluetooth button for at least 5 seconds.