Removing The Limitation On Hdmi Video Output (Monitor Check); Selecting The Hdmi 4K Signal Format (4K Mode); Backing Up/Recovering The Settings (Recov./Backup); Restoring The Default Settings (Initialize) - Yamaha AVENTAGE RX-A1060 Owner's Manual

Removing the limitation on HDMI video output
(MONITOR CHECK)
MONITOR CHECK
YES
The unit automatically detects resolutions supported by a TV connected to the HDMI OUT jack.
Disable the monitor check function if you want to specify a resolution in "Resolution" (p.118)
when the unit cannot detect the TV's resolution or when you want to specify a different
resolution than the detected resolution.
Settings
Enables the monitor check function. (Outputs video signals with a resolution
YES
supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a specified
SKIP
resolution regardless of compatibility with the TV.)
Y
Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV after
"MONITOR CHECK" has been set to "SKIP".

Selecting the HDMI 4K signal format (4K MODE)

4K MODE
MODE 2
Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz) compatible
TV and playback device are connected to the unit.
Settings
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
(4:2:0 format only for VIDEO AUX [HDMI IN] jack)
MODE 1
Depending on the connected device or HDMI cables, video may not be displayed
correctly. In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
X
When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps.

Backing up/recovering the settings (RECOV./BACKUP)

RECOV./BACKUP
BACKUP
Creates backup of the settings of the unit, or recovers the settings from the backup.
⬛
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select "BACKUP" or "RECOVERY" and press INFO to start the
process.
Choices
BACKUP Creates backup of the settings of the unit in the internal memory.
Recovers the settings of the unit from the backup (available only when
RECOVERY
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).

Restoring the default settings (INITIALIZE)

INITIALIZE
CANCEL
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
133
En