Covers (Attaching A Cover To Copies) - Xerox 4110 User Manual

X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e

Covers (Attaching a Cover to Copies)

You can make copies with a cover attached.
The front and back cover can be output before the first page of the
document on a different type of paper (for example, colored paper
or heavyweight paper).
KEY POINT: When you select this feature, if the number of the
document pages exceeds the maximum that the machine can
scan, the portion of the document already scanned cannot be
printed, copied, or saved. In this case, cancel the job following the
message that is displayed.
The maximum number of the document pages that can be
scanned is 2,000 pages per job. For multiple jobs, the maximum is
about 20,000 pages altogether if the document size is A4 or Letter.
This figure should only be used as a guide, since the maximum
number of the document pages the machine can scan depends on
the types, sizes and direction of the document.
1.
On the All Services screen, select Copy. Select the Output
Format tab and then select Covers.
2.
Select any item.
3.
Select Save to keep your changes.
! Front Cover
Setting front cover for the first page can be done.
• No Covers
A cover is not attached.
• Blank Covers
A blank sheet of paper is attached as the cover.
• Printed Front Cover - Side 1
The document is copied on the external sides of front
cover from the first page. Select when you want to copy on
only the external side of the front cover.
• Printed Front Cover - Side 2
3 . C o p y
3-55