Changing Paper Settings - Xerox 4110 User Manual

Changing Paper Settings

X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
5.
Load and align the edge of the paper against the right edge of
the tray with the side to be copied or printed on facing up.
KEY POINT: Do not load paper exceeding the maximum fill line.
Doing so might cause paper jams or machine trouble.
6.
Push the tray in gently until it comes to a stop.
NOTE: Affix the paper size label to the front of the paper tray.
If paper tray types have been changed, the settings must be
modified. The following describes how to change the paper type
on paper trays.
NOTE: This procedure requires a System Administrator
password. Contact your System Administrator for
assistance with this procedure.
For custom paper 1 to 5 to which the user assigns a name:
For information about how to set names to custom paper 1
to 5, refer to "Custom Paper Name" in the System
Administration Guide or contact your System
Administrator.
For information about image quality processing for
different paper types, refer to "Image Quality" in the
System Administration Guide or contact your System
Administrator.
8 . P a p e r a n d O th e r M e d i a
8-17