Changing Feature Screen; Power On/Off; Powering On - Xerox 4110 User Manual

2 . P r o d u c t o v e r v i e w

Power on/off

Powering on

2 - 8

Changing feature screen

You can customize the setting screen for the following features on
the All Services screen.
• Copy
• E-mail
• Scan to Mailbox
• Scan to FTP/SMB
For how to change settings, refer to "Copy Mode Settings" and
"Scan Mode Settings" in the System Administration Guide.
WARNING: Never touch a labeled area indicating High
Temperature. Contact can lead to burns.
Switch on the power before operating the machine. After the
power is on, the machine will take about 5 minutes to warm up
before you can start making copies. Turn the machine off at the
end of the day or when it is not in use for a long period of time.
Also, use Power Saving feature when not in use for a while to
reduce the power consumption.
CAUTION: Switching off the power of the machine may cause
loss of data being processed.
For information about power saving feature, refer to "Power Saver
Mode" on page 2-10.
The procedure for turning on the power is as follows:
Open the cover and press the power switch to the | position to turn
the power on.
NOTE: The "Please wait..." message indicates that the machine
is warming up. The machine cannot be used while it is warming
up.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e