Running Sample Copies - Xerox Wide Format 6705 System User Manual

2.9

Running Sample Copies

This section describes how to run a sample copy of an area of a document with several settings applied, in order to
determine the optimal settings. Any portion on the document can be specified as the sample area. This sample area
can be printed with a variety of settings such as the enlarge/reduce ratio, density level, and original type, applied.
The sample copy can show a list of effects of nine levels of density, seven types of image quality, or seven levels of
auto background suppression.
The Sample Copy function cannot be used when:

Important
- [Copy Output] is set to [Collated], and [Change Settings] is applied to the next document
- Copy is running in the auto mode
- You are loading paper manually (bypass copying)
- Copy from memory is running
- Interrupt copy is running
When [Original Type] is set to [Printed Original] or [Photograph], the Background Suppression List cannot be

output.
T he Color Board & Page Memory for IIT is required to use this feature.

Note
The following describes an example of how to run a sample copy for reviewing a listing of available densities, and
then print the entire image with the optimal density.
Scan Start Position
Measurement
Sample Copy -
Document
Density list
Light -4
Light -3
Light -2
Light -1
Normal
Dark +1
Dark +2
Dark +3
Dark +4
Copy from Memory -
Output

2.9 Running Sample Copies

2
93