Copy Output - Hole Punching Screen - Xerox 4110 User Manual

X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e

Copy Output - Hole Punching Screen

You can select the punching position other than the position
displayed on the Finishing screen.
1.
From the Finishing screen, in the Staple Position area,
select Hole Punching.
2.
Make a selection.
3.
Select Save to keep your choice.
NOTE: 3 holes can be set depending on a optional package. For
more information, contact the Customer Support Center.
! Off
No punch position is selected.
! 2 Holes
You can select two positions for punching.
! 4 Holes
You can select four positions for punching.
3 . C o p y
3-85