Image Shift - Side 1/Image Shift - Side 2 Screen - Xerox 4110 User Manual

3 . C o p y
3 - 4 4
! No Shift
Copies are made without the position of the document image
being shifted.
! Auto Center
Copies are made so that the center of the document matches the
center of the paper.
! Image Shift/Variable Shift
You can set the margin amount within the range from 1.9 to 0 to
1.9 inches (50 to 0 to 50 mm) in 0.1 inch or 1 mm increments.
! Side 1
Displays the Image Shift - Side 1 screen.
! Side 2
Displays the Image Shift - Side 2 screen.
! Mirror Shift
When copying with the same setting as Side 1, Check Mirror Shift.
! Original Orientation
Refer to "Original Orientation (Specify the Orientation of Loaded
Documents)" on page 3-49.

Image Shift - Side 1/Image Shift - Side 2 Screen

You can set the copy position/image shift of Side 1 or Side 2.
1.
On the All Services screen, select Copy, then the Scan
Options tab. From the Scan Options screen that appears,
select Image Shift and then Side 1 or Side 2.
2.
Select an item.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e