Xerox 4110 User Manual page 140

3 . C o p y
3 - 9 6
1.
Select Delete Outside/Delete Inside - Area X.
2.
Enter the value for the X1 in X1 using the numeric keypad, and
select Next.
3.
Enter the value for the Y1 in Y1 using the numeric keypad, and
select Next.
4.
Enter the value for the X2 in X2 using the numeric keypad, and
select Next.
5.
Enter the value for the Y1 in Y1 using the numeric keypad, and
select Next.
NOTE: To change the copy ratios you have entered, select Next,
and enter the numerical values again.
If all of X1, Y1, X2, and Y2 are set to 0, the area will be
invalid and the Extract/Delete function cannot be used.
! Clear Area X
Clear the all area you have set.
NOTE: X displays an area number.
! Save/Next
Pressing Next moves to the next coordinate section. The
indicator shows which coordinate is to be input.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e