Transmitting A Document - Olivetti OFX 800 User Manual

Professional ink jet fax
Table of Contents

Advertisement

PHOTO, if the document contains mainly pho-
tographic images. The upper row of the display
shows "PHOTO" and the lower shows «DOCU-
MENT READY».
EXTRA PHOTO, if the document contains pho-
tographic images and you wish to obtain an ex-
cellent reproduction. The upper row of the dis-
play shows "EXTRA PHOTO" and the lower
shows «DOCUMENT READY».
When switched on, the fax machine is set auto-
matically to transmit text and graphic documents
with optimum definition.
To transmit clearly defined copies of photo-
graphic images, proceed as follows:
1.
Make sure that the display shows the initial wait-
ing mode and the date and time.
RX ON FAX
02-10-00
2.
Press the
key and the "8" key on the nu-
meric keypad.
8.SETUP
3.
Press the
key.
DATE AND TIME
4.
Press the
key.
VARIOUS SETTINGS
5.
Press the
key until the display shows:
"PHOTO:AUTO". Texts and graphics are printed
clearly in this mode
PHOTO: AUTO
{
y
6.
Press the

NH
available: «PHOTO: GREY TONES». The pho-
tograph will be reproduced very clearly in this
mode.
PHOTO: GREY TONES
16
100%
15:29
/1-9
ys to select the other option
7.
Press the
key to confirm your selection
and then press the
its initial waiting mode.
RX ON FAX
02-10-00

TRANSMITTING A DOCUMENT

Procedure A:
Î
i.e.:
1.
Make sure that the display shows the initial wait-
ing mode and the date and time.
RX ON FAX
07-10-00
2.
Insert the document in the ADF. The display
shows the original value for resolution: «NOR-
MAL».
NORMAL
DOCUMENT READY
,
If the document you are about to transmit is
particularly light or dark, or if it contains very
small characters or drawings, you should
change the pre-set contrast values.
3.
Dial directly on the fax machine keypad the num-
ber (max. 64 digits) to which you want to send
your document.
TYPE NUMBER
0125 230023
,
If you dial the wrong digit: position the cursor
{
y
using the
/
overtype select the correct one. If you want to
delete the number completely, press the
key.
4.
Press the
key to start the transmission.
At the end the message "TX COMPLETED" is
displayed for a few seconds and then the fax
machine returns to the initial waiting mode.
RX ON FAX
07-10-00
T
key to return the fax to
100%
15:29
Î
100%
15:42
100%
100%
15:42
RANSMITTING AND RECEIVING

Advertisement

Table of Contents
loading

Table of Contents