Installing The Usb Drivers In Macos X - Sagem F@ST 1400 User Manual

SAGEM F@st™ 1400 / 1400W
4.2

Installing the USB drivers in MacOS X

The installation procedure described below has been performed in MacOS X
(10.1 or 10.2). The modem/router can be installed in other operating systems
such as MacOS 8.6, MacOS 9.0, MacOS 9.1 and MacOS 9.2 (see following
paragraph).
• Insert the modem/router's installation CD-ROM in the CD-ROM drive; an icon appears
on the desktop.
• Double-click on this icon in order to bring up the contents of the CD-ROM.
• Double-click in the OS X directory in order to initiate program installation.
The authentication screen opposite appears.
• Key in the name and password of the
Administrator account, then click on OK.
It is essential to have the Administrator's rights to install the modem/router.
The screen opposite will appear.
• Click on Install in order to continue the
installation procedure.
The installation software program will then display a message indicating that installing the
modem/router requires all the applications open be closed.
• Click on Continue in order to initiate the
installation procedure.
Configuring the modem/router 14