Warning Sagem Communication closely follows all technological changes and is continually striving to improve its products for the benefit of its customers. It therefore reserves the right to change its documentation accordingly without notice. All the trademarks mentioned in this guide are registered to their respective owners: - SAGEM F@st™...
Preservation of the environment as part of a sustainable development logic is an essential concern of Sagem Communication. Sagem Communication‘s aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.
Powering up 2.2.2 Connecting the ADSL lead to the SAGEM F@st™ 1200 2.2.3 Connecting the SAGEM F@st™ 1200 to a computer via the ETH lead 2.2.4 Connecting the SAGEM F@st™ 1200 to a computer via the USB lead 2.3 Installation instructions 3.
Page 5
A.5 Restoring the factory-set configuration B. Appendix B - Safety warnings B.1 Safety warnings B.1.1 Safety levels on the SAGEM F@st™ 1200 unit B.2 CE declaration of conformity C. Appendix C - Technical specifications C.1 Mechanical specifications - Displays C.2 Interface specifications C.3 Environmental specifications...
F.4 "LINE" connector pinout List of figures Figure 2.1 - Overview of the unit ....................... 2-2 Figure 2.2 - Interconnecting the SAGEM F@st™ 1200 ports ..............2-5 SAGEM F@st™ 1200 User Guide - 252417101-01 Page 0-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 7
This chapter covers an overview of the SAGEM F@st 1200 § 1.1 the composition of the supply § 1.2 the IT requirements § 1.3 SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 1-1...
1 - Introduction Introduction The SAGEM F@st™ 1200 is an IP modem/router with high speed ADSL interface enabling different users to share an ADSL connection in SOHO (Small Office, Home Office) residential usage mode. This modem/router provides Internet access for computers equipped with a USB port and/or an Ethernet port.
1 - Introduction Composition of the SAGEM F@st™ 1200 package The SAGEM F@st™ 1200 is supplied in a package containing: One SAGEM F@st™ 1200 modem/router, One mains adapter, One RJ11/RJ11 FDT ADSL line lead (length = 3 m), One RJ45/RJ45 FDT Ethernet lead (length = 3 m), One Type A male / Type B male USB lead (length = 1.5 m),...
30 Mb free on your hard disk, a monitor with minimum resolution: 1024 x 768. Before installing the SAGEM F@st™ 1200 modem/router, we would advise you to uninstall any other modem or router. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 1-4 Sagem Communication document.
This chapter covers a description of your SAGEM F@st 1200 § 2.1 installation of your SAGEM F@st 1200 § 2.2 installation instructions § 2.3 SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-1...
The unit has a front panel with four supervisory LEDs and a rear panel with connection ports, an on/off switch and a reset button. Figure 2.1 - Overview of the unit SAGEM F@st™ 1200 User Guide - 252417101-01 Page 2-2 Sagem Communication document. Reproduction and disclosure prohibited...
ADSL line activation This LED blinks slowly when the ADSL line is being synchronized, This LED is lit when the ADSL line is synchronized. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-3...
Type B "Slave" USB female socket for connection to a computer (USB interface). 8-way RJ45 socket for connection either to a terminal or to a local area network (Ethernet 10/100 BASE-T LAN interface). SAGEM F@st™ 1200 User Guide - 252417101-01 Page 2-4 Sagem Communication document. Reproduction and disclosure prohibited...
Connect the other end of the lead to the port marked ADSL on the splitter connected to your home's standard French wall telephone outlet (T connector). 2.2.3 Connecting the SAGEM F@st™ 1200 to a computer via the ETH lead This connection is set up on installation with the dedicated CD-ROM.
The SAGEM F@st™ 1200 must be installed and used inside a building. The room temperature must not exceed 45°C. The SAGEM F@st™ 1200 should not be exposed to strong sunlight or to strong sources of heat. The SAGEM F@st™ 1200 should not be placed in an environment subject to significant steam condensation.
Page 18
2 - Description SAGEM F@st™ 1200 User Guide - 252417101-01 Page 2-8 Sagem Communication document. Reproduction and disclosure prohibited...
(Ethernet). Installing and configuring your modem/router on your § 3.2 computer's USB port. Installing and configuring an additional computer. § 3.3 SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-1...
Page 20
USB interface, you must uninstall the modem/router. To do this: Select Start / All programs / SAGEM F@st™ 1200 / Uninstall. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 3-2 Sagem Communication document. Reproduction and disclosure prohibited...
In Windows The Ethernet socket marked on your SAGEM F@st™ 1200 is provided for you to connect your computers or wired Ethernet network elements. This port is a 10/100BASE-T port. It supports bit rates of 10 Mbit/s and 100 Mbit/s in Half or Full Duplex mode on a category 5 double twisted pair.
Page 22
Carry out the operations described on screen. Click the button to continue installation. The screen opposite appears. Click to install your modem/router on the ETH interface. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 3-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 23
The screen opposite appears. Select your country of residence and your Internet Service Provider (ISP). Click the button to continue installation. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-5...
Page 24
This icon created in the task bar lets you know the status of the modem/router (see Appendix A - Troubleshooting). You can also use the Start menu to select All programs / SAGEM F@st 1200 to access the following options: SAGEM F@st™...
Page 25
To surf the Internet, you must enter the correct information, supplied to you by your Internet Service Provider. For this: Open your configurator (see chapter 5), then select the "WAN Setup" tab. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-7...
1200, the IP address assigned to your computer by the modem/router is specified.(example: 192.168.1.12). Click the "Configure" button to modify or check your Macintosh's configuration. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 3-8 Sagem Communication document. Reproduction and disclosure prohibited...
Page 27
SAGEM F@st 1200's LAN interface (192.168.1.1). You can now close the network window. The DHCP client, DNS servers and Search domains fields are optional. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-9...
3.2.1 In Windows The USB port of the SAGEM F@st™ 1200 is a USB 1.1 port supporting a maximum bit rate of 12 Mbit/s. The connector is type B. On this port, you can connect directly to a computer with a type A USB port using a USB lead (supplied with the equipment).
Page 29
Carry out the operations described on screen. Click the button to continue installation. The screen opposite appears. Click to install your residential modem/router on the USB interface. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-11...
Page 30
The screen opposite appears. Select your country of residence and your Internet Service Provider (ISP). Click the button to continue installation. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 3-12 Sagem Communication document. Reproduction and disclosure prohibited...
Page 31
This icon created in the task bar lets you know the status of the modem/router (see Appendix A - Troubleshooting). You can also use the Start menu to select All programs / SAGEM F@st 1200 to access the following options: SAGEM F@st™...
"WAN Setup" tab. 3.2.2 In Mac OSX The USB interface is not supported by Mac OSX. Ethernet interface Using is described in section 3.1.2. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 3-14 Sagem Communication document. Reproduction and disclosure prohibited...
Note: If this screen does not appear: Select Start, then Run, then enter: "<CD-ROM drive letter> :\F@st1200.exe then click OK. The screen opposite appears. Click SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-15...
Page 34
• connecting the modem/router to the telephone socket and the mains outlet, • and configuring your SAGEM F@st™ 1200 (login identifier and login password, etc.), must not be carried out when installing and configuring an additional computer whatever the interface (ETH or USB).
4. Information SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 4-1...
Page 36
To redisplay this icon, select Start, All programs SAGEM F@st 1200 then click the left mouse button on Information. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 4-2 Sagem Communication document. Reproduction and disclosure prohibited...
Tells you how to access the configurator's home screen. This chapter § 5.1 Gives recommendations for the use of the configuration § 5.2 screens. Details the various modem/router setup functions. §.5.3 SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-1...
Double-click the configuration icon created on the desktop after installing the equipment: In the Start menu, select programs SAGEM F@st 1200. then left click on Configure. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 39
5 - Configuration The configuration screen opposite appears with the "Status" tab selected. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-3...
Click this icon ; the opposite home screen appears. To make the "F@st 1200 Configuration" icon constantly present on the desktop, select in the Home screen with the mouse the following icon: then move it to the desktop.
Page 41
To display menu, select it in the drop-down list or click the appropriated tab if this one is displayed at the screen. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-5...
You are recommended to save all the parameters that you have altered. Click this button to exit from the application without saving your input. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-6 Sagem Communication document. Reproduction and disclosure prohibited...
• Advanced (see 5.3.1.5). 5.3.1.1 Status Object: This function is for viewing the ADSL line statistics. Select the Status tab. The screen opposite appears. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-7...
Page 44
Displays the encapsulation supplied by your Internet Service Provider (ISP). Two possible cases: : Virtual Channel (Encapsulation without header). : Logical Link Control (Encapsulation with header). SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-8 Sagem Communication document. Reproduction and disclosure prohibited...
Page 45
Firmware version ADSL code version Displays the ADSL code. F@st1200 Setup version Displays the configuration application version. No field on the screen can be modified. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-9...
Depending on the protocol chosen, the number of fields to be completed differs. You must therefore select a protocol mode before completing the various fields. RFC1483 Bridged Common fields only. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-10 Sagem Communication document. Reproduction and disclosure prohibited...
Page 47
Select DIRECT (Recommended). Enter a delay (expressed in minutes) after which the PPPoE link will Idle timeout (min) disconnect in the absence of Internet traffic. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-11...
Page 48
Subnet Mask This field is active only when the "DHCP client" function is deactivated (Enable DHCP field check box not checked). Enter a subnetwork mask. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-12 Sagem Communication document. Reproduction and disclosure prohibited...
If you want to change the address and local subnetwork of your modem/router, you must configure your modem/router's DHCP server in the same network. (see Change of address section). SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-13...
Secondary DNS Address of your Internet Server Provider's 0.0.0.0 secondary DNS server. Availability period (in days) of each IP address Lease (in days) assigned. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-14 Sagem Communication document. Reproduction and disclosure prohibited...
Page 51
An example of change of address and subnetwork of the LAN involving a change of network on the modem/router's DHCP server is given below. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-15...
If you want to use this functionality, enter a local (LAN) IP address. Click the button to register the address entered then the button if you want to save this configuration. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-16 Sagem Communication document. Reproduction and disclosure prohibited...
Page 53
The screen opposite shows two configurations added. "Delete" button To delete a configuration from the list, select the one you want to delete then click the button. SAGEM F@st™ 1200 User Guide - 252417101-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-17...
The screen opposite appears. 5.3.2 In Mac OSX The screens appearance and the configurator menus contents in Mac and Windows being similar, refer to section 5.3.1. SAGEM F@st™ 1200 User Guide - 252417101-01 Page 5-18 Sagem Communication document. Reproduction and disclosure prohibited...
Check that the IP Address entry contains a value other than 0.0.0.0 (192.168.1.10 for example) for the local area network (LAN) interface connected to the modem. SAGEM F@st™ 1200 User Guide - 252336343-01 Page A-2 Sagem Communication document. Reproduction and disclosure prohibited...
(98, ME and 2000) may present slight differences. A.2 Interpreting LEDs The four LEDs on the SAGEM F@st™ 1200 reflect the status of the various interfaces. When the SAGEM F@st™ 1200 is powered up, the PWR LED lights first followed by the other three LEDs, then these last three go off in turn.
Check the connection of your ADSL splitters. Each telephone socket used in your installation should be fitted with an ADSL splitter. Check that the RJ11 line lead supplied with your SAGEM F@st™ 1200 is connected to one of your outlets. The use of telephone extension leads is not recommended.
Check that the type of power supply available in your premises is in accordance with the mains voltage needed to power your SAGEM F@st™ 1200. Check that the power supply lead supplied is correctly connected at one end to the mains power supply network.
To restart your modem/router in factory-set configuration: Press the button using a pointed object until the four LEDs come on steady. Then release this button; your SAGEM F@st™ 1200 restarts in factory-set configuration (Local area network: 192.168.1.0/24 and modem/router address: 192.168.1.1).
B. Appendix B - Safety warnings This chapter covers safety warnings § B.1 the CE declaration of conformity § B.2 SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page B-1...
Appendix B - Safety warnings B.1 Safety warnings The SAGEM F@st™ 1200 product is compliant with EN 60950, December 2001 edition. The safety levels according to this standard are as follows: B.1.1 Safety levels on the SAGEM F@st™ 1200 unit...
Ed 09-1998 EN 55 024 Ed 09-1998 Sagem Communication disclaims all liability if the current regulations are not correctly observed at the place of installation. The CE declaration of conformity for the SAGEM F@st 1200 is included in the form of a pdf file on the product delivery CD-ROM.
Page 64
Appendix B - Safety warnings SAGEM F@st™ 1200 User Guide - 252336343-01 Page B-4 Sagem Communication document. Reproduction and disclosure prohibited...
§ C.1 the specifications of the various interfaces § C.2 the environmental specifications § C.3 the software and protocols § C.4 SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-1...
• : Desktop • : Wall-mounted Protection rating • : IP30 Displays Four LEDs Power supply presence USB activity ETH activity LINE ADSL interface SAGEM F@st™ 1200 User Guide - 252336343-01 Page C-2 Sagem Communication document. Reproduction and disclosure prohibited...
• 12.5 dBm Port impedance • 100 Ohms Range • 0 to 5500 m (according to ADSL mode) Latency • Simple (Fast or Interlaced) SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-3...
Page 68
Mains power supply characteristics Type • Mains lead Class • Mains voltage • 230 V Power consumed • < 8 W Mains connector • Type C Europlug SAGEM F@st™ 1200 User Guide - 252336343-01 Page C-4 Sagem Communication document. Reproduction and disclosure prohibited...
Transmission • EN 55 022 Class B - Ed 01-1999 Harmonic currents • EN 61 000-3-2 • EN 61 000-3-3 • EN 55 024 SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-5...
IP over ATM • RFC 1483/2684 ETH over ATM • RFC 1483/2684 Configuration • LAN port Version download • 1 version Management • From ETH, USB SAGEM F@st™ 1200 User Guide - 252336343-01 Page C-6 Sagem Communication document. Reproduction and disclosure prohibited...
D. Appendix D - Default configuration This chapter covers the default configuration on the local area network (LAN) § D.1 side SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page D-1...
Appendix D - Default configuration This chapter gives the default parameter settings for the SAGEM F@st™ 1200 on leaving the factory. D.1 Default configuration on the local area network (LAN) side The table below gives the values of the main default LAN parameters for your residential...
E. Appendix E - Glossary SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page E-1...
Page 74
Operation, Administration and Maintenance OBEX OBject, EXchange Personal Area (Ad-Hoc) Network Password Authentication Protocol Peripheral Component Interconnect PCMCIA Personal Computer Memory Card International Association SAGEM F@st™ 1200 User Guide - 252336343-01 Page E-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 75
Virtual LAN VoIP Voice over IP Virtual Path Virtual Path Identifier Virtual Private Network Wide Area Network Meshed network of information servers Weighted Fair Queuing SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page E-3...
Page 76
Appendix E - Glossary SAGEM F@st™ 1200 User Guide - 252336343-01 Page E-4 Sagem Communication document. Reproduction and disclosure prohibited...
"USB" connector § F.2 the pinout of the "ETH" connector § F.3 the pinout of the "LINE" connector § F.4 SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page F-1...
The "USB" interface is connected to the equipment via a type B USB socket. Contact N° Signal Meaning PC power supply (+) -Data Subscriber line signal +Data Subscriber line signal Ground Ground SAGEM F@st™ 1200 User Guide - 252336343-01 Page F-2 Sagem Communication document. Reproduction and disclosure prohibited...
1 2 3 4 5 6 Contact N° Signal Meaning LINE-A Line A signal LINE-B Line B signal Not Connected Not Connected Not Connected Not Connected SAGEM F@st™ 1200 User Guide - 252336343-01 Sagem Communication document. Reproduction and disclosure prohibited Page F-3...
Page 80
Appendix F - Connectors SAGEM F@st™ 1200 User Guide - 252336343-01 Page F-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 82
Siège social : 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE Tél. : +33 1 40 70 63 63 - Fax : +33 1 40 70 66 40 http://www.sagem.com Société Anonyme au capital de 300 272 000 € - 480 108 158 RCS Paris...