Procedure To Be Applied To A Computer In Mac Os - Sagem F@ST 1400 User Manual

5.2

Procedure to be applied to a computer in Mac OS

The downloading operation is initiated from a computer in Mac OS when you connect
(preferably via the Ethernet link) to the FTP server embedded in the modem/router:
• Hook your computer up to the modem/router, preferably via Ethernet.
• In Mac OS X, open the "MacOSXmacosversionXEn" disk (located on the desktop) then /
applications/utilities. Click on Terminal to open the Mac OS X control mode (to make
handling easier, the Terminal could be copied onto the desktop using the Edit menu
located right at the top of the desktop).
• In Mac OS 9, use a FTP client software program.
• Key in ftp 192.168.1.1 (IP default address of the modem/router's LAN interface).
• Enter the user name: root (by default).
• Enter the password: 1234 (by default).
• Key in bin.
• Key in hash.
• Key in the command put file name in .bin (with .bin extension) app.2
(e.g. put application.bin app.2).
(the name of the file to be downloaded must be preceded and followed by a "space").
Do not carry out any operation while the file is being transferred, owing to the
risk of damage to the modem/router.
If the modem/router is affected by a power cut arising during this phase, the
operation to update the software program will fail and the modem/router will be
unable to restart in the previously active version.
In this case, the modem/router starts up in backup mode (see appendix A of
the Reference Manual).
• Wait to get control back from the terminal.
When the software program version has been backed up, the modem/router must be
restarted using its switch to activate the new software program version.
SAGEM F@st™ 1400 / 1400W
35 Troubleshooting