Table of Contents
Advertisement
The application installs the drivers required for the modem/router to operate correctly.
• Check that the modem/router is powered
up.
• When the screen opposite appears,
connect the USB cable to the modem/
router and to the computer (see § 4.4).
• Click on Finish.
In Windows 98, if you connect a USB peripheral for the first time, Windows 98
might ask you to insert the Windows 98 CD-ROM in order to install the
necessary system files.
The operation to configure the modem/router starts automatically as soon as the drivers
have finished being installed.
The modem/router henceforth appears as an Ethernet card which is accessible
in the properties of the local network (Network Neighborhood/Properties).
You can now access the modem/router's HTTP configurator.
Refer to chapter 5 - "Access to the HTTP configurator", page 18.
SAGEM F@st™ 1400 / 1400W
13
Configuring the modem/router
Advertisement
Table of Contents
