Installing And Configuring Your Modem/Router On Your Computer's Usb Port; In Windows - Sagem F@ST 1200 User Manual

Ip modem/router
Hide thumbs Also See for F@ST 1200:
Table of Contents

Advertisement

3 - Installing your modem/router
3.2
Installing and configuring your modem/router on your
computer's USB port
3.2.1

In Windows

The USB port of the SAGEM F@st™ 1200 is a USB 1.1 port supporting a maximum bit rate of
12 Mbit/s. The connector is type B.
On this port, you can connect directly to a computer with a type A USB port using a USB lead
(supplied with the equipment).
Do not connect the USB lead until prompted by the installation procedure (that is,
after installing the drivers).
The installation procedure described below was performed in
Windows    XP. Installation in other Windows operating systems (98,
ME and 2000) may present slight differences.
Insert the CD-ROM in your computer's
1
appropriate drive; the screen opposite
appears.
Carry out the operations described on
screen.
Click the
continue installation.
Note: If this screen does not appear: Select Start, then Run, then enter:
"<CD-ROM drive letter> :\F@st1200.exe then click OK.
SAGEM F@st™ 1200 User Guide - 252417101-01
Page 3-10
Sagem Communication document. Reproduction and disclosure prohibited
button to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents