2
Installing the modem/router
Rotate the antenna in such a way as to be able to insert the cables in their respective fixed
connectors.
2.1
Plugging in the telephone line cord
• Connect one end of the ADSL telephone line cord (2)
to the LINE port on your modem/router.
Do not insert the line cord in the Ether net por t marked ETH.
This may damage your modem/router.
• Connect the other end of the ADSL line cord to one of the ADSL filters on your
installation.
(2)
Connection with no telephone set
The line cord is the black RJ-11-type cord. Do not mistake it for the RJ-45-type
Ethernet cable. The RJ-11 connector is narrower than the RJ-45.
ADSL filter (3)
ADSL filter (3)
Connection with a telephone set or a FAX
7
SAGEM F@st™ 1400 / 1400W
(2)
(2)
Installing the hardware
(1)