Table of Contents
Advertisement
SAGEM F@st™ 1400 / 1400W
Depending on the type of server you wish to install, the parameters you need to indicate
differ:
Protocol
Port
Local IP address
Configuring the modem/router for Peer-to-Peer software
2
programs
Some Peer-to-Peer software programs (e.g. "eMule" and "eDonkey") require an additional
configuration of the modem/router:
• Click on LAN Servers in the
Basic menu.
The screen opposite will appear.
• Click on Add
The screen opposite will appear:
• Indicate the name of the
computer using the Peer-to-
Peer software program in the
Server Name field (e.g.
MyPCPeer2Peer).
• Set Access Activated to Yes.
• Indicate the protocol and port
used by your Peer-to-Peer
software program.
e.g. for "eMule" and "eDonkey", the protocol is TCP and the port is 4662.
Installing servers on the local network
Private FTP server access
from the Internet:
port 20 or 21
TCP
20 or 21
IP address of
your FTP server
28
Private HTTP server access
from the Internet:
port 80
TCP
80
IP address of
your HTTP server
Advertisement
Table of Contents
