Sagem F@ST 1400 User Manual page 12

• Check that the modem/router is:
- connected to the computer via the
Ethernet cable,
- powered up.
The application searches for your Ethernet card and integrates the parameters required for
communicating with the modem/router.
The following screen is displayed:
When configuration is complete, the modem/router settings window opens automatically.
You can now access the modem/router's HTTP configurator.
Refer to chapter 5 - "Access to the HTTP configurator", page 18.
SAGEM F@st™ 1400 / 1400W
11 Configuring the modem/router