Related Manuals for Sagem F@ST 1400
Summary of Contents for Sagem F@ST 1400
- Page 1 English Default parameters SSID = F@st1400W SAGEM F@ST 1400 F@ST 1400W User guide www.sagem.com/adsl/ SAGEM SA Le Ponant de Paris 27, rue Leblanc 75512 PARIS CEDEX 15 - France...
-
Page 2: Table Of Contents
SAGEM F@st™ 1400 / 1400W Table of Contents PRESENTATION ........................ 3 Prerequisites ....................... 4 Contents of the SAGEM F@st™ 1400/1400W modem/router package ..... 5 INSTALLING THE HARDWARE ..................6 Installing the ADSL filters ..................6 Installing the modem/router ................. 7 Plugging in the telephone line cord ............ - Page 3 SAGEM F@st™ 1400 / 1400W Updating the modem/router’s application software progam ......33 Procedure to be applied to a computer in Windows ....... 33 Procedure to be applied to a computer in Mac OS ........ 35 APPENDICES ........................36 Description of the modem/router ............... 36 Modem/router status (QUICK STATUS) ............
-
Page 4: Presentation
SAGEM F@st™ 1400 / 1400W PRESENTATION This guide will enable you to easily install your SAGEM F@st™ 1400/1400W modem/ router. This unit is an ADSL Wi-Fi modem/router integrating three functions: An integrated ADSL modem for a direct connection to your ADSL line. -
Page 5: Prerequisites
SAGEM F@st™ 1400 / 1400W Symbols used in this guide Warns you against a hazardous act or omission. Gives important information that you should be aware of. Prerequisites The following elements are required before the modem/router can be used: •... -
Page 6: Contents Of The Sagem F@St™ 1400/1400W Modem/Router Package
SAGEM F@st™ 1400 / 1400W Contents of the SAGEM F@st™ 1400/1400W modem/router package USB cable ADSL line cord (type A USB/ (RJ11/RJ11) type B USB) Power block ADSL Wi-Fi modem/router ADSL filter Ethernet cable (option) (RJ45/RJ45 crossed cable) + Ethernet initialization key (7) -
Page 7: Installing The Hardware
SAGEM F@st™ 1400 / 1400W INSTALLING THE HARDWARE Installing the ADSL filters Installing a filter on all the phone plugs used is essential for ensuring that your phone terminals and modem/router operate correctly (3 filters maximum per installation). Carry out the following steps: •... -
Page 8: Installing The Modem/Router
SAGEM F@st™ 1400 / 1400W Installing the modem/router Rotate the antenna in such a way as to be able to insert the cables in their respective fixed connectors. Plugging in the telephone line cord • Connect one end of the ADSL telephone line cord (2) to the LINE port on your modem/router. -
Page 9: Powering Up The Modem/Router
After a few minutes, the modem/router is automatically synchronized with your ADSL line. The LINE LED comes on permanently. You can now connect your computers to the SAGEM F@st™ 1400/1400W modem/router: • via the USB interface, see chapter 4 "Connection via the USB port" ............page 12 •... -
Page 10: Configuring The Modem/Router
SAGEM F@st™ 1400 / 1400W CONFIGURING THE MODEM/ROUTER Preliminary configuration You can configure your modem/router via its HTTP configuration interface. This interface is visible from your Web browser. This chapter describes the steps making possible: • access to this HTTP configuration interface, •... -
Page 11: Connection Via The Ethernet Port
SAGEM F@st™ 1400 / 1400W Connection via the Ethernet port Wiring • Connect the Ethernet cable (6) to the ETH port on the modem/router. • Connect the other end of the Ethernet cable to your computer’s Ethernet card. Configuring the network parameters The installation CD-ROM enables you to automatically configure your network card in Windows. - Page 12 SAGEM F@st™ 1400 / 1400W • Check that the modem/router is: - connected to the computer via the Ethernet cable, - powered up. The application searches for your Ethernet card and integrates the parameters required for communicating with the modem/router.
-
Page 13: Connection Via The Usb Port
SAGEM F@st™ 1400 / 1400W Connection via the USB port Before installing your modem/router, it is essential that you uninstall any other ADSL/USB modem. Install the USB driver using the installation CD-ROM BEFORE connecting your modem/router to your computer’s USB port. - Page 14 SAGEM F@st™ 1400 / 1400W The application installs the drivers required for the modem/router to operate correctly. • Check that the modem/router is powered • When the screen opposite appears, connect the USB cable to the modem/ router and to the computer (see § 4.4).
-
Page 15: Installing The Usb Drivers In Macos X
SAGEM F@st™ 1400 / 1400W Installing the USB drivers in MacOS X The installation procedure described below has been performed in MacOS X (10.1 or 10.2). The modem/router can be installed in other operating systems such as MacOS 8.6, MacOS 9.0, MacOS 9.1 and MacOS 9.2 (see following paragraph). - Page 16 SAGEM F@st™ 1400 / 1400W Once the files have been copied onto the hard disk, the screen opposite will appear. • Connect the USB cable (5) to the modem/ router via the connector on the rear panel marked USB and to the computer (see §...
-
Page 17: Installing The Usb Drivers In Macos 8.6 And 9
SAGEM F@st™ 1400 / 1400W Installing the USB drivers in MacOS 8.6 and 9 The modem/router can be installed on MacOS 8.6, MacOS 9.0, MacOS 9.1 and MacOS 9.2. The example below was carried out in MacOS 9.0. • Insert the modem/router’s CD-ROM in the appropriate drive of your computer. An icon will appear on the desktop. -
Page 18: Wiring
SAGEM F@st™ 1400 / 1400W The Connect via: field should display ADSL USB Modem xxx by default. If this is not the case, select this value using the drop-down list. The Configure: field should display Using DHCP Server by default. If this is not the case, select this value using the drop-down list. -
Page 19: Access To The Http Configurator
SAGEM F@st™ 1400 / 1400W Access to the HTTP configurator Access to the modem/router’s HTTP configurator is protected by a user name and a password. The authentication screen is the following: The default settings are: • User name : root •... -
Page 20: High-Speed Configuration Of Your Suscription Settings
SAGEM F@st™ 1400 / 1400W High-speed configuration of your suscription settings Do not forget to save any modification made to the configuration of your modem/ router. • To start the Quick Setup wizard, click on Quick Setup in the left-side column or in the center of the screen. - Page 21 SAGEM F@st™ 1400 / 1400W Configuring the wireless network (WLAN) (SAGEM F@st™ 1400W only) • To activate the wireless network function, select Yes in the drop-down list in the WLAN Network Operational. • Modify the SSID field with the name of the network of your choice (32 characters at most).
- Page 22 SAGEM F@st™ 1400 / 1400W Make a note of the keys and the sentence keyed in, and keep them in a safe place. Avoid noting them down in a file on your computer. • You can also modify the keys by keying them directly into the boxes. The characters are "0"...
-
Page 23: Configuring The Wireless Network
SAGEM F@st™ 1400 / 1400W CONFIGURING THE WIRELESS NETWORK The wireless network is only available on the SAGEM F@st™ 1400W. The Wi-Fi technology protects the data flowing on your wireless network. This protection is provided by two configurable parameters: • the SSID identifier •... -
Page 24: Configuring Your Computers
SAGEM F@st™ 1400 / 1400W Modifying the keys Modify the keys so that they are personal and note their values. You will be able to use them when configuring the other pieces of equipment making up your wireless network. • To modify the keys, key in a sentence in the PassPhrase field: - in 64-bit mode: the sentence generates the 4 keys simultaneously, - in 128-bit mode: the sentence generates a key for the line selected. -
Page 25: Safety On Your Modem/Router
SAGEM F@st™ 1400 / 1400W SAFETY ON YOUR MODEM/ROUTER Your SAGEM F@st™ 1400W modem/router has been designed with the constant concern in mind to protect your data and your high-speed Internet access. The functions described in this chapter therefore protect your installation from intrusions on the Wi-Fi wireless network as well as from Internet. -
Page 26: Ssid And Wep Key (Sagem F@St™ 1400W Only)
SAGEM F@st™ 1400 / 1400W SSID and WEP key (SAGEM F@st™ 1400W only) These settings protect your wireless network against local intrusions. Look up the "Configuring the wireless network" section on page 22. Filtering the Mac addresses (SAGEM F@st™ 1400W only) This function makes it possible to limit the number of computers with access to your wireless network. -
Page 27: Firewall
SAGEM F@st™ 1400 / 1400W Firewall Your modem/router has a built-in firewall protecting your wired or wireless local network from intrusions originating in the Internet network. For the usual Internet uses - consulting Web sites or mail boxes - no specific firewall configuration is required. -
Page 28: Installing Servers On The Local Network
SAGEM F@st™ 1400 / 1400W INSTALLING SERVERS ON THE LOCAL NETWORK Installing servers on the local network or using certain Peer-to-Peer software programs requires an additional configuration of your modem/router. This configuration must be carried out once for each server or computer which uses a Peer-to-Peer software program. -
Page 29: Configuring The Modem/Router For Peer-To-Peer Software Programs
SAGEM F@st™ 1400 / 1400W Depending on the type of server you wish to install, the parameters you need to indicate differ: Private FTP server access Private HTTP server access from the Internet: from the Internet: port 20 or 21... - Page 30 SAGEM F@st™ 1400 / 1400W • Indicate the computer’s local IP address. • Click on Apply. • Save by clicking on Save button. You can now use your Peer-to-Peer software program. N.B.: In this way, only one computer can be authorized to use "eMule" or "eDonkey".
-
Page 31: Troubleshooting
SAGEM F@st™ 1400 / 1400W TROUBLESHOOTING Absence of ADSL synchronization The LINE LED does not come on or is flashing. • Check that the modem/router is powered up. The PWR LED should be on. If that is not the case: - Check that the power pack is properly connected to the mains. - Page 32 SAGEM F@st™ 1400 / 1400W If access to the configurator is still impossible, you should carry out the following instructions: Check that the Ethernet or USB cable is properly connected at both its ends. In the event of the USB being used, check that the USB Bridge/Router ADSL peripheral is actually installed on your computer.
-
Page 33: Internet Site Look-Up Impossible
SAGEM F@st™ 1400 / 1400W Checking IP address allocation. In Windows - In Windows 98: Start then Run, key in winipcfg. - In Windows XP, 2000, Me: Start then Run, key in cmd then ipconfig /all. Validate by pressing Enter. -
Page 34: Updating The Modem/Router's Application Software Progam
The downloading operation is initiated from a computer in Windows by connecting to the FTP server embedded in the modem/router: 1. Connect your computer to the modem/router, preferably via Ethernet. 2. Insert the SAGEM F@st™ 1400 installation CD-ROM. 3. Click on Router-Upgrade : updating router. 4. The dialogue box opposite is displayed: 5. - Page 35 SAGEM F@st™ 1400 / 1400W 7. Key in the password: 1234 (by default, or the one you have chosen, if need be). 8. Select the file to be downloaded. 9. Click on Download to start the transfer procedure. 10. The download monitoring window opposite...
-
Page 36: Procedure To Be Applied To A Computer In Mac Os
SAGEM F@st™ 1400 / 1400W Procedure to be applied to a computer in Mac OS The downloading operation is initiated from a computer in Mac OS when you connect (preferably via the Ethernet link) to the FTP server embedded in the modem/router: •... -
Page 37: Appendices
SAGEM F@st™ 1400 / 1400W APPENDICES Connect to our Web site (www.sagem.com) to download the latest versions of the drivers and softwares, to look up the Frequently Asked Questions (FAQ) and the electronic documentation relating to your modem. Description of the modem/router Adjustable antenna (SAGEM F@st™... -
Page 38: Modem/Router Status (Quick Status)
Traffic on the USB link active USB link inactive ™ * The WLAN LED is significant only in the case of the SAGEM F@st 1400W modem/router. Modem/router status (QUICK STATUS) The Quick Status page enables the modem/router connection statuses to be viewed. -
Page 39: Uninstalling The Modem/Router
SAGEM F@st™ 1400 / 1400W Uninstalling the modem/router • Disconnect le modem/router. • Insert the installation CD-ROM in your computer’s CD-ROM drive. • Click on USB Use (uninstall) on Ethernet Use (uninstall) . The window opposite is displayed: • Click on OK. -
Page 40: Safety Instructions
SAGEM F@st™ 1400 / 1400W SAFETY INSTRUCTIONS Environment • The modem/router should be installed and used inside a building. • The room temperature should not exceed 45°C. • The modem/router can be placed on a desktop or fixed vertically in its wall mounting. -
Page 41: Safety Levels
European Community directives 1995/5/CE as well as with the essential demands of the directives 89/336/CEE dated 03/05/1989 and 73/23/CEE dated 19/02/1973. The CE compliance declaration for the SAGEM F@st 1400/1400W is implemented within the framework of the R&TTE directive. - Page 42 SAGEM F@st™ 1400 / 1400W NOTES: _________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________...
- Page 43 _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ Registered trademarks SAGEM F@st™ is a registered trademark of SAGEM. Windows™ and Internet Explorer™ are registered trademarks of Microsoft Corporation. ® ® Apple and Macintosh OS are registered trademarks of Apple Computer Incorporation.