Table of Contents
Advertisement
SAGEM F@st™ 1400 / 1400W
• Indicate the computer's local IP address.
• Click on Apply.
• Save by clicking on Save button.
You can now use your Peer-to-Peer software program.
N.B.:
In this way, only one computer can be authorized to use "eMule" or "eDonkey".
If you wish to use several "eMule" or "eDonkey" programs simultaneously, you must change
the "eDonkey" or "eMule" default configuration in order to use a port other than 4662 on the
additional computers.
To do that, simply change the port in the "eMule" Connection menu. Each "eDonkey" (or
"eMule") must be configured with a different port.
Then, the configuration described above must be repeated for each additional computer by
replacing 4662 with the "eDonkey" or "eMule" port.
29
Installing servers on the local network
Advertisement
Table of Contents
