SAGEM F@st™ 1400 / 1400W
3
Connection via the Ethernet port
3.1
Wiring
• Connect the Ethernet cable (6) to the ETH port on the modem/router.
• Connect the other end of the Ethernet cable to your computer's Ethernet card.
3.2
Configuring the network parameters
The installation CD-ROM enables you to automatically configure your network card in
Windows.
Automatic configuration
• Insert the modem/router installation
CD-ROM and the window opposite will
come up on the screen.
• Click on Ethernet Use.
Configuring the modem/router
ETH
(6)
10