Wiring - Sagem F@ST 1400 User Manual

SAGEM F@st™ 1400 / 1400W
The Connect via: field should display ADSL USB Modem xxx by default. If this is not the
case, select this value using the drop-down list.
The Configure: field should display Using DHCP Server by default. If this is not the case,
select this value using the drop-down list.
You can now access the modem/router's HTTP configurator.
Refer to chapter 5 - "Access to the HTTP configurator", page 18.
4.4

Wiring

• Connect the "square" end of the USB cable (5) to the modem/router (USB port).
• Connect the "flat" end of the USB cable (5) to an available port on your computer or your
USB Hub.
(5)
17 Configuring the modem/router