Sagem F@ST 1400 User Manual page 16

Once the files have been copied onto the
hard disk, the screen opposite will appear.
• Connect the USB cable (5) to the modem/
router via the connector on the rear panel
marked USB and to the computer
(see § 4.4), then click on Continue.
The installation procedure has been
completed.
• Click on Restart.
• Click on the Apple menu in the menu bar,
select System Preferences, then click on
the Network icon. The screen opposite will
appear.
The Location field should contain ADSL
USB Bridge/Router.
The Show field should contain Ethernet
Adaptor (en x), where "x" is a number
allocated by the operating system.
• Select the TCP/IP tab.
The Configure field should display Using
DHCP by default.
If this is not the case, select this value using the drop-down list.
If Using PPP value comes up on the screen, select the PPPoE tab and then
untick the Connect using PPPoE box.
• Click on Apply Now in order to validate the connection in DHCP mode.
The DHCP Client ID, DNS Servers and Search Domains fields are optional.
You can now access the modem/router's HTTP configurator.
Refer to chapter 5 - "Access to the HTTP configurator", page 18.
SAGEM F@st™ 1400 / 1400W
15 Configuring the modem/router