8. Option Settings
The option settings let you customise your fax to better suit your needs. An initial
setting has been made for each option at the factory. You can change a setting by
following the steps described for each option below.
FUNCTION
4
or
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not made
with the RESOLUTION key) for transmitting documents. Press 1 (YES) to set the
default resolution to FINE, or 2 (NO) to set it to STANDARD.
Initial setting: 2
FUNCTION
4
YES
NO
or
1
2
Setting 2: NUMBER OF RINGS TO ANSWER
This sets the number of rings the fax machine waits before answering an incoming
call in FAX and TEL/FAX reception modes. Enter any number from 2 to 5.
Initial setting: 2
FUNCTION
4
Enter a number
from 2 to 5
72
First press FUNCTION
and 4, then press # or * to
scroll through the options.
Display
will show:
NUMBER OF RINGS
until display
Press
shows:
RECALL INTERVAL
FINE PRIORITY
STOP
NUMBER OF RINGS
STOP