9. Option Settings
The option settings allow you to customize the operation of the machine to
better suit your needs.
The option settings have been initially configured at the factory. To change a
setting, follow the steps below to display the setting, and then enter a new
selection for the setting as explained in the table that follows.
FUNCTION
1
Press
2
Press
, then
•
The option settings are described in the table below and on the following
pages
.
3
Enter a selection for the setting by pressing the number keys as
explained in the table.
4
After entering a selection, the subsequent option setting will appear in
the display. To exit the settings, press
Option Settings
Make a selection for the displayed setting as explained below.
This is done in step 3 of the above procedure.
Setting
FINE PRIORITY This is used to change the default resolution for faxing from
, then
until [OPTION SETTING]
repeatedly until the desired setting appears.
Description
STANDARD to FINE. Press
(NO) to select STANDARD.
Initial setting: NO (STANDARD)
Option Settings
.
appears
STOP
.
(YES) to select FINE, or
139