Option Settings - Sharp UX-51 Operation Manual

8
Option
Settings
The option settings let you customise your fax to better suit your needs. An
initial setting has been made for each option at the factory. You can change a
setting by following the steps described for each option below.
FUNCTION
First press and
FUNCTION
4
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not
made with the RESOLUTION key) for transmitting documents. Press 1
(YES) to set the default resolution to FINE, or 2 (NO) to set it to STANDARD.
Initial setting: 2
FUNCTION
4
NEIN
JA
or
2
1
Setting 2: GREY SCALE SETTING (UX-238 Only)
This sets the grey scale used for the HALF TONE resolution setting. Press 1
for 16 levels (this gives lower quality and faster transmission) or 2 for 64
levels (this gives higher quality and slower transmission).
Initial setting: 2
FUNCTION
Press
4
16
64
or
2
1
82
or * to scroll through the options.
4 #
, then press
or
Display will
GRUNDEINST. FEIN
show:
GRAUSTUFENANZAHL
until display
shows:
GRAUSTUFENANZAHL
ANZAHL DER RUFE
STOP
STOP