Sharp UX-385 Operation Manual page 78

Option Settings
Setting 11: OFF HOOK HOLD TIME
This setting can be used to make the fax automatically take over the line a set
number of seconds after an answering machine connected to the fax answers. Set
the number of seconds by entering a 3-digit number (001 to 255), or enter 000 to
turn off the function. (See Chapter 6 for more details.)
Initial setting: 000
FUNCTION
4
Enter a number
from 001 to 255
Setting 12: SELECT AUTO RECEIVE
Press 1 to have the fax answer a call if an answering machine connected to the fax
does not answer within 5 rings. Press 2 to turn the function off. (See Chapter 6 for
more details.)
Initial setting: 2
FUNCTION
4
YES NO
or
1 2
Setting 13: LANGUAGE SELECT
This sets the language used in display messages, reports, and lists. Press the
START/MEMORY key, the # key or the * key one or more times until the desired
language appears in the display, and then the START/MEMORY key again.
FUNCTION
4
START/MEMORY
76
until display
Press
shows:
SELECT AUTO RCV.
until display
Press
shows:
LANGUAGE SELECT
until display
Press
shows:
or
START/MEMORY
OFF HOOK HOLD
STOP
SELECT AUTO RCV.
STOP
LANGUAGE SELECT
PBX CONNECTION
STOP