Sharp UX-385 Operation Manual page 75

Setting 3: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials when the
line is busy. Enter 01 for 1 minute, 02 for 2 minutes, etc., up to a maximum of 15
minutes.
Initial setting: 05
FUNCTION
4
Enter a number
from 01 to 15
Setting 4: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the line
is busy. Enter any number from 00 to 10.
Initial setting: 02
FUNCTION
4
Enter a number
from 00 to 10
Setting 5: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension phone
connected to the same line as the fax, you can make the fax begin reception by
pressing 5, *, and * on the phone. Use this setting if you want to use a number
other than 5 to begin fax reception. You can enter any number from 0 to 9.
Initial setting: 5
FUNCTION
4
Enter a number
from 0 to 9
until display
Press
shows:
RECALL TIMES
until display
Press
shows:
TEL/FAX REMOTE #
until display
Press
shows:
REMOTE RECEPTION
Option Settings
RECALL INTERVAL
STOP
RECALL TIMES
STOP
TEL/FAX REMOTE #
STOP
73