Option Settings - Sharp UX-310 Operation Manual

Setting 3: NUMBER OF RINGS TO ANSWER
This sets the number of rings the fax machine waits before answering an
incoming call in FAX and TEL/FAX reception modes. Enter any number from
1 to 5.
Initial setting: 1
Note: In some countries, the lowest possible setting is 2 and the highest is 4.
FUNCTION
4
Enter a number
1 5
from to
Setting 4: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension phone
connected to the same line as the fax, you can make the fax begin reception by
pressing 5, *, and * on the phone. Use this setting if you want to use a
number other than 5 to begin fax reception. You can enter any number from 0
to 9.
Initial setting: 5
FUNCTION
4
Enter a number
0 9
from to
until
Press
display
shows:
TEL/FAX REMOTE #
until
Press
display
shows:
REMOTE RECEPTION

Option Settings

NUMBER OF RINGS
STOP
TEL/FAX REMOTE #
STOP
79