Blocking Reception Of Unwanted Faxes - Sharp UX-385 Operation Manual

Blocking Reception of Unwanted Faxes

The Anti Junk Fax function allows you to block reception of faxes from parties which
you specify. This saves paper by not printing out unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 17 to YES as explained
in Chapter 8, and then enter the fax numbers from which you do not want to receive
faxes as shown below.
Comments:
Up to 5 numbers can be entered in
the Anti Junk Number List.
To clear a number from the Anti
Junk Number List, you need to
know the 1-digit number which
identifies it. If you have forgotten
this number, print out the Anti Junk
Number List as explained in
Chapter 9.
1
Press these keys:
FUNCTION
JUNK FAX # MODE
3
Blocking Reception of Unwanted Faxes
2
Press 1 to store a number in the
Anti Junk Number List, or 2 to clear
a number from the list.
SET
1
3
Storing: Enter a 1-digit number
from 1 to 5. This number identifies
the fax/voice number you will store
in the next step.
Clearing: Enter the number which
identifies the fax/voice number you
want to clear, and go to Step 5.
CLEAR
2
or
1
(Example)
63