Sharp UX-385 Operation Manual page 60

Activating the Ansewering Machine Connection
Quiet Detect Start Timing
This setting can be used to delay the
start of the Quiet Detect Time
function. For example, if you want to
insert a pause at the beginning of
your answering machine's outgoing
message to ensure clear detection of
fax signals, you can use this setting
to delay the start of silence detection
so that the pause will not cause the
fax to take over the line.
Quiet Detect Start Timing has been
turned off at the factory. If you want to
use this function, turn it on by
resetting Option Setting 10 to the
desired delay time (1 to 15 seconds).
This procedure is explained in
Chapter 8, Option Settings. As a
general guide, the delay time should
be slightly longer than the pause
before the outgoing message.
58
Off Hook Hold
This setting can be used to make the
fax automatically take over the line
and attempt reception after a set
number of seconds.
For normal operation, we recommend
that you do not turn this function on;
however, if you are having trouble
receiving faxes in A.M. mode, you can
try various time settings to see if it
helps. Turn the function on by setting
Option Setting 11 to the desired
number of seconds (1 to 255
seconds). This procedure is explained
in Chapter 8, Option Settings.