Sharp UX-385 Operation Manual page 77

Setting 8: PSEUDO RINGING DURATION
This sets the duration of pseudo ringing when the reception mode is set to TEL/
FAX. Enter a number from 1 to 4 as follows:
1 (15 SEC.):
2 (30 SEC.):
3 (60 SEC.):
4 (120 SEC.):
Initial setting: 1
FUNCTION
4
Enter a number
from 1 to 4
Setting 9: QUIET DETECT TIME
When an answering machine is connected to the fax, the fax will take over the line
and begin reception if it detects a certain duration of silence after the answering
machine answers a call. This sets the duration of silence (in seconds). Enter a
number from 01 to 10, or enter 00 to turn off the function.
Initial setting: 06
FUNCTION
4
Enter a number
from 00 to 10
Setting 10: QUIET DETECT START TIMING
This setting can be used to delay the start of the Quiet Detect Time function used for
an answering machine connection. Enter a 2-digit number equal to the desired
number of seconds of the delay (01 to 15), or enter 00 for no delay. (See Chapter 6
for more details.)
Initial setting: 00
FUNCTION
4
Enter a number
from 00 to 15
15 seconds
30 seconds
60 seconds
120 seconds
until display
Press
shows:
QUIET DETECT TM.
until display
Press
shows:
QUIET START TIME
until display
Press
shows:
OFF HOOK HOLD
Option Settings
PSEUDO RING DUR.
STOP
QUIET DETECT TM.
STOP
QUIET START TIME
STOP
75