Table of Contents
Advertisement
SINGLE PASS FEEDER (AR-SP4N)/REVERSING SINGLE PASS FEEDER (AR-RP3N)
Stream feeding mode
If the stream feeding mode has been enabled using a key operator program, the message "Set
originals for stream feeding." will appear for approximately 5 seconds after feeding of all originals is
completed. While this message is displayed, any new originals placed in the SPF or RSPF will be fed
and copied automatically.
5KEY OPERATOR See page 129 for information on setting the stream feeding mode.
Using the SPF or the RSPF
5KEY OPERATOR If SPF/RSPF is disabled using a key operator program, the SPF or the RSPF
cannot be used. See page 135.
One-sided copies from one-sided originals
1
Ensure that no original is left on the platen glass.
2
Adjust the original guides to the size of the originals.
3
Set the originals face up in the document feeder tray.
q
The original size will be indicated in the display, and the paper tray with the
corresponding paper size will be automatically selected.
5KEY OPERATOR The auto paper select function can be disabled using a key operator
program. If this function has been disabled, use the PAPER SELECT key to select the
desired paper tray. See page 134.
q
To copy onto a different size paper, use the PAPER SELECT key to make the selection.
7
97
Advertisement
Table of Contents
