Table of Contents
Advertisement
OUTLINE OF THIS MANUAL
1.
GETTING STARTED
This chapter describes the basic information on the use of
this copier.
2.
MAKING COPIES
This chapter describes the basic copying functions such
as normal copying, reduction or enlargement, and
exposure adjustments.
3.
SPECIAL FUNCTIONS 1
This chapter describes special copying functions including
various image editing functions.
4.
SPECIAL FUNCTIONS 2
This chapter describes the functions that can be used
when the optional dual function board (AR-EB6) is
installed.
5.
COPIER TROUBLE?
This chapter describes how to remove misfed paper and
how to remedy minor problems.
6.
GENERAL INFORMATION
This chapter describes general information about the use
of the copier and the loading of paper and toner.
7.
OPTIONAL EQUIPMENT
This chapter describes operating instructions for the Single Pass
Feeder (AR-SP4N), the Reversing Single Pass Feeder (AR-
RP3N), the Finisher (AR-FN5N), the 500-Sheet Paper Feed Unit
(AR-D11N), and the 2 x 500-Sheet Paper Feed Unit (AR-D12N).
8.
KEY OPERATOR'S GUIDE
This chapter contains information about all programs for
use by the key operator. The programs allow the key
operator to tailor many functions of this copier for specific
modes of operation.
2
1
2
3
4
5
6
7
8
1
Advertisement
Table of Contents
