Stand/MPD & 2000 sheet paper drawer Power supply unit (AR-D13) Stand/3 x 500 sheet (AR-DC1) paper drawer (AR-D14) Simultaneous installation is required Output units AR-MS1 Mail-bin stacker =Any of the units must be installed together. AR-MS1 PRODUCT OUTLINE, CONFIGURATION 1-1...
Upper Provided detection tray Lower Provided tray Power consumption Less than about 20.2W Power source Supplied from the optional power source (DC24V 0.8A / DC5V 0.2A) External 465x530x508 (mm) dimensions(WxDxH) Occupied 465x530 (mm) dimensions(WxD) Weight Approx. 19kg AR-MS1 SPECIFICATIONS 3-1...
•Start installation after checking that the DATA and COMMUNICATION indicators on the operation panel are neither lit nor blinking. •For installation of AR-MS1, an optional stand/paper drawer (stand/MPD & 2000 sheet paper drawer, stand/3 x 500 sheet paper drawer or multi purpose drawer) must have been installed.
Page 5
Steps 5) and after are the procedure to be carried out when a multi purpose drawer has been installed. If a stand/MPD & 2000 sheet paper drawer or a stand/3 x 500 sheet paper drawer has been installed, carry out steps 8) and after. Harness cover AR-MS1 UNPACKING AND INSTALLATION 4-2...
Page 6
<1>Connect the AC cord of the power supply unit to the inlet connector of the main unit of the printer at the location shown in the illustration. Rear cabinet AC cord (* Similar work for the multi purpose drawer) (* Similar work for the multi purpose drawer) AR-MS1 UNPACKING AND INSTALLATION 4-3...
26 Paper transport roller 6 13 Paper exit full detection 7 (MPFD7) 27 Male bin tray 4 paper exit roller 14 Paper exit full detection 8 (MPFD8) 28 Male bin tray 5 paper exit roller AR-MS1 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-1...
Page 8
No. 7 bin tray full detection H: Paper full detected DOPD Top cover open/close sensor Top cover open/close detection L: Upper cover open MDD1 Front cover open/close sensor Front cover open/close detection L: Front cover open AR-MS1 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-2...
•The combination of paper selection and other functions may not be compatible. For instance, if heavy paper, envelopes, label stock, etc. are selected, it will not be possible to select duplex, offset tray, saddle stitch, etc. For details, see printer driver help. The illustration below shows the screen for a PCL printer driver in the Windows 98 environment. AR-MS1 MACHINE OPERATION 6-1...
Lubricate Move position When Unit name Part name 100K 150K 200K 250K 300K 350K 400K Remark calling Transport section Transport rollers Transport paper guides Drive section Gears (Specified position) Belts Other Sensors Discharge brushes AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-1...
Page 12
Gears Lubricate 100K If not, the frame may be bent, causing a breakdown of the Belts Check 300K machine. B. External cabinet (1) Gate solenoid (2) Transport roller AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-2...
Page 13
(3) Upper open/close sensor (6) Transport roller (4) Upper cover (5) Paper entry sensor AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-3...
Page 14
Job item cycle Sensors Clean 100K Transport paper guides Clean 100K (3)Paper guide (1)Transport sensor When assembling the paper guide, check to insure that the paper guide boss is securely inserted into the mounting hole. AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-4...
Page 15
E. Front side of the unit F. Rear side of the unit Parts name Job item cycle Parts name Job item cycle Sensors Clean 100K Sensors Clean 100K (1)Main PWB/Main motor (1)Front door open/close sensor (2)Paper exit full sensor AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-5...
Page 16
(4)Transport roller (1)Paper guide H. Right side of the unit (Paper exit side) Parts name Job item cycle Sensors Check 100K Discharge brushes Lubricate 100K Transport rollers Clean 100K (2)Paper transport sensor/Paper exit full sensor AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-6...
Page 17
(1)Paper transport sensor (1)Gate tray (2) Paper exit full sensor I . Paper exit tray unit Parts name Job item cycle Sensors Clean 100K Transport paper guides Clean 100K AR-MS1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE 7-7...
Page 22
CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) Contains lithium-ion battery. Must be disposed of properly. Remove the battery from the product and contact federal or state environmental agencies for information on recycling and disposal options.
Page 23
COPYRIGHT COPYRIGHT COPYRIGHT 2001 BY SHARP CORPORATION 2001 BY SHARP CORPORATION 2001 BY SHARP CORPORATION All rights reserved. All rights reserved. All rights reserved. Printed in Japan. Printed in Japan. Printed in Japan. No part of this publication may be reproduced,...