Table of Contents
Advertisement
SINGLE PASS FEEDER (AR-SP4N)/REVERSING SINGLE PASS FEEDER (AR-RP3N)
4
Ensure that the one-sided to one-sided copying mode is selected.
q
When no icon indicating a 2-sided copy mode is displayed, the one-sided to one-sided
copying mode is selected.
5
Set the number of copies and press the START (
q
Press the CLEAR (C) key to stop copying in the middle of a run.
Two-sided copies from one-sided originals
q
Paper sizes that can be used in the 2-sided copy mode are A5, B5, B5R, A4, and A4R (8-1/2" x 11"
and 8-1/2" x 11"R).
If a dual function board is installed, paper sizes that can be used are A5, B5, B5R, A4, A4R, B4, and
A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17").
1
Ensure that no original is left on the platen glass. Adjust the original
guides to the size of the originals and set the originals face up in the
document feeder tray.
q
If an uneven number of originals are set, the last copy will be one-sided.
98
Ready to copy.
A4
AUTO
100%
A4
AUTO
) key.
Advertisement
Table of Contents
