Interrupting A Copy Run - Sharp AR-215 Operation Manual

INTERRUPTING A COPY RUN

INTERRUPT is used to interrupt a long copy run so that another job can be done.
q
Two-sided and 2 in 1/ 4 in 1 copying jobs cannot be interrupted.
q
Two-sided copying, sort, group, staple sort, job programs and 2 in 1/ 4 in 1 cannot be selected for
interrupt copying. Key operator programs cannot be used in the interrupt mode.
1 Press the INTERRUPT (
q
If INTERRUPT is pressed during copying from the platen glass, the copier will stop and
return to the initial settings after the copy in progress has been completed.
q
If INTERRUPT is pressed during copying when an optional SPF or RSPF is being used,
the copier will stop after completing copying of any original which has been fed by the
SPF or RSPF.
q
If this copier has been programmed in the auditing mode, the account number entry
message will appear. Enter your account number using the numeric keys. The number of
copies of the interrupt copying will be accumulated against this account number. See
page 20.
2
When the copier stops, remove the original(s) of the current job and
set an original for interrupt copying.
3 Select the desired available copier functions.
4
Set the number of copies and press the START (
q
The interrupt copies will be offset from the previous copies unless the offset function is
disabled.
5KEY OPERATOR See page 130 for the offset function.
38
) key.
) key.