Bypass Feed (Special Paper); Acceptable Paper For Copying From The Bypass Tray; Copying From The Bypass Tray - Sharp AR-215 Operation Manual

BYPASS FEED (special paper)

The bypass tray must be used to feed special papers such as transparency film and labels but can also
be used to feed standard copy paper.
Acceptable paper for copying from the bypass
tray
Size
Ordinary paper: A6 to A3
(5-1/2" x 8-1/2" to 11" x 17")
Envelopes: International DL
(110 x 220 mm), International
C5 (162 x 229 mm),
Commercial 10 (4-1/8" x 9-1/2")
* For paper weighing from 105 to 128 g/m
can be fed through the bypass tray.
** Do not use envelopes that have metal clasps, plastic snappers, string closures, windows, linings,
self-adhesive patches or synthetic materials. These will cause physical damage to the copier.
q
For best results, use only paper recommended by SHARP.
q
Special papers except SHARP recommended transparency film, labels, and envelopes must be fed
one sheet at a time through the bypass tray. Up to 40 sheets of SHARP recommended transparency
film and labels can be set at one time. Up to 5 envelopes can be set at one time.
q
When feeding two or three hole prepunched paper, load the paper so that the punched edge is not
positioned in the feed slot.

Copying from the bypass tray

1
Unfold the bypass tray.
q
When feeding A4R, B4 or A3 (8-1/2" x 11"R, 8-1/2" x 14" or 11" x 17") sized paper,
extend the bypass tray to support the paper.
Weight
52 to 128 g/m (14 lbs.
2
to 34 lbs.)* (Ordinary
paper)
(28 to 34 lbs.), A4 (8-1/2" x 11") is the maximum size that
2
Capacity
(80 g/m (21 lb.) paper)
2
100 sheets
2
Special paper
Transparency
film, labels,
envelopes**
35