Table of Contents
Advertisement
Problem
Copies are smudged or
dirty.
Black or white stripes
appear on copies.
Paper size for a paper tray
cannot be set.
Power is on but copying is
not possible.
Lighting fixture flickers.
CAUTION:
Be sure to use only genuine SHARP parts and supplies.
Please contact your SHARP service centre immediately if a problem persists after checking the above.
q
Platen glass or platen cover
dirty?
q
Original smudged or blotchy?
q
Is the scanning window of an
optional SPF or RSPF dirty?
q
Is the COPY indicator off?
q
Is copying, printing or facsimile
printing being performed?
q
Are only the mode indicators on? The copier is in the auto power
q
Is the COPY indicator off?
q
Is
two-sided
printing
performed?
q
Is the same power outlet used for
the lighting fixture and the
copier?
TROUBLESHOOTING
Solution
Clean regularly. See page 87.
Use a clean original.
Clean the scanning window.
Press the COPY key to select the
COPY mode. See page 14.
Set the paper size after copying,
printing or facsimile printing is
complete.
shut-off mode. Press the COPY key
or another mode key that is lit.
Press the COPY key to select the
COPY mode.
being
Wait until the printing job finishes.
Connect the copier to a power
outlet which is not used for other
electric appliances.
5
77
Advertisement
Table of Contents
