Table of Contents
Advertisement
SORT/GROUP
2
Press the OUTPUT key.
q
The output mode selection screen will appear.
3
Use the
OK key.
q
Also the OUTPUT key can be used to select an output mode.
4
Make all other desired copier selections and press the START (
key.
q
If originals have been set in an optional SPF or RSPF in step 1, copying will start. If an
original has been set on the platen glass, proceed to the next step.
5
Replace the finished original with the next original and press the
START (
have been scanned.
q
If the non-sort mode has been selected in step 3, copying will start each time the START
( ) key is pressed.
58
and
keys to select the desired output mode and press the
) key after it lights up. Repeat this step until all originals
SORT
NO SORT
SORT
1
2
3
GROUP
1
1
1
)
Advertisement
Table of Contents
